Does Fabuloso leave a Residue? (Answered!)

Every liquid with minerals or other chemicals in it can leave a residue when it gets evaporated from a surface. This residue leaves a mark on the surface and some of them can be removed while some may not. 

Many floor cleaners or all-purpose cleaners like Fabuloso, do a good job in cleaning the surface as effectively as possible. They perform well against dirt and try to clean the surface to a great extent. But does this cleaning action leave a residue on them?

Let us find out whether Fabuloso can leave residue on the floor and understand how it works against the dirt.

Does Fabuloso leave a Residue

Does Fabuloso leave a Residue?

Fabuloso products will never leave a residue and if you dilute the products in the prescribed manner, you will not have any kind of residue on any surface. Residue can appear only when excess concentrated Fabuloso is left on the surface for a long time. Also, residue can appear if there are any specific chemical salts present on the surface which may react with the Fabuloso. But the corrosion inhibitors in Fabuloso mostly avoids residue formation.

To understand this better, you must first know how residues are created when cleaning solutions are used and get to know why Fabuloso doesn’t leave a residue.

How Do Residues Occur With All-Purpose Cleaners?

Residues can occur due to three reasons:

  • Nature of Chemical Reaction
  • Presence of exposed inners of a surface
  • Strong alkali solution applied over a surface

Nature of Chemical Reaction

If you look at the ingredients of an all-purpose cleaner, they are most likely to be strong alkalis that perform effectively against the acidic dirt.

When these strong alkalis react with certain types of chemicals along with dirt, they might cause some residues.

Residues are simply by-products of the chemical reaction that happens when these alkaline solutions react with it. Sometimes the by-products might be salts that get sedimented on the surface as a result of the application.

Presence of Exposed Inners of a Surface

At times, the surface might have some damages which exposes the inner layers. These layers might not be resistant to the strong alkalis of the cleaners. So, this causes permanent residues to occur on the surface.

Strong Alkali solution applied over a surface

The important thing to notice here is that only when a strong alkali solution hits the surface, the residue formation occurs. Or the cleaning solution must pool over a certain area and stay there to slowly react over the surface. 

Diluted solutions will not cause any kind of damage or residues. So, residues can only occur when the undiluted solution is applied directly over a surface.

These are the different ways in which all-purpose cleaners can produce a residue. But if you look at the products like Fabuloso, they don’t cause any kind of residue on the floors. You might wonder what might be the reason. Let us discuss it in detail.

Why Fabuloso Doesn’t Cause Any Residue?

We already discussed the reason for residue formation in all-purpose cleaners like Fabuloso. But in many scenarios, Fabuloso doesn’t create residues because it has corrosion inhibitors mixed in the ingredients.

So, even when you use Fabuloso in a slightly concentrated manner, you cannot see any visible residue formation on the surfaces.

Fabuloso also clearly states the volume of the solution you should dilute with water for the best cleaning. When these factors are properly considered, you can avoid residue formation in any circumstances.

The chemical composition of Fabuloso is safe to use on many surfaces and you can find it to leave no residue whatsoever. By following proper usage instructions, you can avoid any other damages that may happen on your floor.

How to Dilute Fabuloso to Avoid Residues?

Generally, half a cup of Fabuloso can be mixed with a gallon of water and used for cleaning. If you are using Fabuloso 2X concentrated formula, then you have to mix 1/8 cup of Fabuloso in a gallon of water. 

When you use Fabuloso in this diluted manner, you can avoid residues effectively. When you need more powerful cleaning for some hard stains and dirt, you can use a full cup for normal Fabuloso and 1/4 cup for concentrated Fabuloso.

Some people might prefer Fabuloso in a spray bottle for cleaning tiled surfaces or glass surfaces. In such cases, you have to dilute 1/4 cup of Fabuloso with a spray bottle full of water. In this manner, you can get the perfect cleaning solution that doesn’t bring any harm.

These are ways in which you must dilute Fabuloso and avoid residue formation. Even though Fabuloso doesn’t create any residue easily, it is best to follow this instruction for safe usage.

Read More

Conclusion

Fabuloso like all-purpose cleaners doesn’t cause residues on surfaces easily. Although they have strong alkali solutions, their corrosive nature is subsided by corrosion inhibitors. Also, if you dilute the solutions properly in water before application, you can avoid any kind of residue or damage to your surface.